|
Sign In to gain access to subscriptions and/or personal tools.
|
Evaluation of Subretinal Implants Coated with Amorphous Aluminum Oxide and Diamond-like Carbon
Robyn Sweitzer
Department of Chemistry, University of Alabama in Huntsville, Huntsville, AL 35899
Carmen Scholz
Department of Chemistry, University of Alabama in Huntsville, Huntsville, AL 35899, and VA Center for Innovative Visual Rehabilitation, Boston, MAcscholz{at}chemistry.uah.edu
Sandra Montezuma
Department of Ophthalmology, Massachusetts Eye&Ear Infirmary, Boston, MA
Joseph F. Rizzo, III
Department of Ophthalmology, Massachusetts Eye&Ear Infirmary, Boston, MA and VA Center for Innovative Visual Rehabilitation, Boston, MA
Retinal prostheses may be used to support patients suffering from age-related macular degeneration (AMD) or retinitis pigmentosa (RP). A hermetic encapsulation of the poly(imide) (PI)-based prosthesis is important in order to prevent the leakage of water and ions into the electric circuitry embedded in the poly(imide) matrix. The deposition of amorphous aluminum oxide (by sputtering) and diamond like carbon (by pulsed laser ablation) were made for applications in retinal prostheses. The thin films obtained were characterized for composition, thickness, adhesion and smoothness by scanning electron microscopy-energy dispersive spectroscopy, atomic force microscopy, profilometry and light microscopy. Biocompatibility was tested in vivo by implanting coated specimen subretinally in the eye of Yucatan pigs. While amorphous aluminum oxide is more readily deposited with sufficient adhesion quality, superior biocompatibility behavior was shown by diamond-like carbon. Amorphous aluminum oxide had more adverse effects and caused more severe damage to the retinal tissue.
Key Words: Rentinal prosthesis biomaterials diamond-like carbon amorphous aluminium oxide
References
- Wyatt, J. and Rizzo, J. (1996). Ocular Implants for the Blind , IEEE Spectrum, 33(5): 47-53 .[CrossRef]
- Zrenner, E. (2002). Will Retinal Implants Restore Vision? , Science, 295: 1022 .[Abstract/Free Full Text]
- Zrenner, E., Stett, A., Weiss, S., Aramant, R.B., Guenther, E., Kohler, K., Miliczek, K.D., Seiler, M.J. and Haemmerle, H. (1999). Can Subretinal Microphotodiodes Replace Degenerated Photoreceptors? , Vision Research, 39: 2555-2567 .[CrossRef][Web of Science][Medline]
[Order article via Infotrieve]
- Jensen, R.J., Rizzo, J.F., Ziv, O.R., Grumet, A. and Wyatt, J. (2003). Thresholds for Activation of Rebbit Retinal Ganglion Cells with an Ultrafine, Extracellular Microelectrode , Opthalmol. Vis. Sci., 44(8): 3533-3543 .
- Sun, J.K.; Montezuma, S.R., Loewenstein, J. and Rizzo, J.F. (2004). Progress Toward a Minimally Invasive, Ab Externo Technique for Subretinal Prosthetic Implantation , Invest. Ophthamol. Vis. Sci., 45(E-abstract): 4190 .[Abstract/Free Full Text]
- Yamauchi, Y., Enzmann, V., Franco, L., Jackson, D., Naver, J., Rizzo, J., Ziv, R. and Kaplan, H. (2005). Comparison of Electrically Evoked Cortical Potential Thresholds Generated with a Sub-retinal or Suprachoroidal Placed Microelectrode Array in the Rabbit , J. Neural Eng., 2(1): S48-S56 .[CrossRef][Medline]
[Order article via Infotrieve]
- Lee, C., Shul, Y. and Han, H. (2002). Dielectric Properties of Oxydianiline Polyimide Thin Films According to the Water Uptake , J. Polymer Sci. Part B Polymer Physics, 40(19): 2190-2198 .[CrossRef]
- Moss, J. (1999). Mechanical Design and Analysis of Implantable Components for a Retinal Prosthesis MS Thesis, MIT.
- Henry, B.M., Dinelli, F., Zhao, K.Y., Grovenor, C.R.M., Kolosov, O.V., Briggs, G.A.D., Roberts, A.P., Kumar, R.S. and Howson, R.P. (1999). A Microstructural Study of Transparent Metal Oxide Gas Barrier Films , Thin Solid Films, 355-356, 500-505 .
- Yamada-Takamura, Y., Koch, F., Maier, H. and Bolt, H. (2002). Hydrogen Permeation Barrier Performance Characterization of Vapor Deposited Amorphous Aluminum Oxide Films Using Coloration of Tungsten Oxide , Surface and Coatings Technology, 153: 114-118 .[CrossRef]
- Qualtrough, A.J. and Piddock, V. (2002). Dental Ceramics: Whats New? , Dental Update, 29(1): 25-33 .[Medline]
[Order article via Infotrieve]
- Moore, W.R., Graves, S.E. and Bain, G.I. (2001). Synthetic Bone Graft Substitutes , ANZ J. Surgery, 71(6): 354-361 .
- Gentle, C.R. (1987). The Use of Ceramics in Prosthetic Heart Valves , MEP Ltd, 16(2): 115-117 .
- Gentle, C.R. and Juden, H. (1984). Wear Tests on Alumina for Application in Heart Valve Prostheses , Engineering in Medicine, 13(2): 79-82 .[Medline]
[Order article via Infotrieve]
- Gentle, C.R. and Tansley, G.D. (1995), Development of a Ceramic Conduit Valve Prosthesis for Corrective Cardiovascular Surgery , Biomaterials, 16(3): 245-249 .[CrossRef][Web of Science][Medline]
[Order article via Infotrieve]
- Yuhta, T., Kikuta, Y., Mitamura, Y., Nakagane, K., Murabayashi, S. and Nishimura, I. (1994). Blood Compatibility of Sputter-deposited Alumina Films , J. Biomed. Mat. Res., 28: 217-224 .[CrossRef][Web of Science][Medline]
[Order article via Infotrieve]
- Hamadouche, M., Boutin, P., Daussange, J., Bolander, M.E. and Sedel, L. (2002). Alumina-on-alumina Total Arthroplasty: A Minimum 18.5-year Follow-up Study , J. Bone Surg. Am., 84-A(1): 69-77 .
- Angus, J.C. and Hayman, C.C. (1988). Low Pressure, Metastable Growth of Diamond , Science, 241: 913 .[Abstract/Free Full Text]
- Lifshitz, Y. (1998). Amorphous Carbon: State of the Art, World Scientific, p. 32, Singapore .
- DebRoy, T., Kumar, S. and Tankala, K. (1994). Optical Emissions During Plasma Assisted Chemical Vapor Deposition , Dia. Rel. Mater., 4: 69-75 .
- Monaghan, D.P., Teer, D.G., Logan, P.A., Efeoglu, I. and Arnell, R.D. (1993). Deposition of Wear Resistant Coatings Based on DLC by UBM Sputtering , Surf. Coat. Technol., 60: 525 .[CrossRef]
- Camata, R.P., Hirasawa, M., Okuyama, K. and Takeuchi, K. (1998). Aerosol Formation and Evolution During Laser Ablation, In: Singh, R.K., Lowndes, D.H., Chrisey, D.B., Narayan, J., Kawai, T. and Fogarassy E. (eds) Advances in Laser Ablation, p. 526, Mater. Res. Soc. Symp. Proc.
- Wei, Q., Sankar, J. and Naranyan, J. (2001). Structure and Properties of Novel Functional Diamond-like Carbon Coatings Produced by Laser Ablation , Surface and Coatings Technology, 146-147: 250-257 .
- Cui, F.Z. and Li, D.J. (2000). A Review of Investigations on Biocompatibility of Diamond-like Carbon and Carbon Nitride Films , Surface and Coatings Technology, 131: 481-487 .[CrossRef]
- Lu, L., Jones, M.W. and Wu, R.L. (1993). Diamond-like Carbon as Biological Compatible Material for Cell Culture and Medical Application , Biomed. Mater. Eng., 3: 223 .[Medline]
[Order article via Infotrieve]
- Lindner, S., Pinkowski, W. and Aepfelbacher, M. (2002). Adhesion, Cytoskeletal Architecture and Activation Status of Primary Human Macrophages on a Diamond-like Carbon Coated Surface . Biomaterials, 23: 767 .[CrossRef][Web of Science][Medline]
[Order article via Infotrieve]
- Alanazi, A., Nojiri, C., Noguchi, T., Kido, T., Komatsu, Y., Hirakuri, K., Funakubo, A., Sakai, K. and Fukui, Y. (2000). Improved Blood Compatibility of DLC Coated Polymeric Material , ASAIO, 46(4): 440-443 .[CrossRef][Web of Science][Medline]
[Order article via Infotrieve]
- Alanazi, A., Nojiri, C., Noguchi, T., Kido, T., Ohgoe, Y., Matsuda, T., Hirakuri, K., Funakubo, A., Sakai, K. and Fukui, Y. (2000). Engineering Analysis of Diamond-like Carbon Coated Polymeric Materials for Biomedical Applications , Artif. Organs, 24(8): 624-627 .[CrossRef][Web of Science][Medline]
[Order article via Infotrieve]
- McLaughline, J.A. and Hailu, W., Diamond-like Carbon Coated Medical Guidewires , Proceedings of the 20th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 20(6): 2879-2880 .
- Elinson, V.M., Sleptsov, V.V., Laymin, A.N., Potraysay, V.V., Kostuychenko, L.N. and Moussina, A.D. (1999). Barrier Properties of Carbon Films Deposited on Polymer-based Devices in Aggressive Environments , Dia. Rel. Mater., 8: 2103 .[CrossRef]
- Yamazaki, K., Litwak, P., Kormos, R.L., Mori, T., Tagusari, O., Antaki, J.F., Kameneva, M., Watach, M., Gordon, L., Umezu, M., Tomioka, J., Koyanagi, H. and Griffith, B.P. (1997). An Implantable Centrifugal Blood Pump for Long Term Circulatory Support , ASAIO J., 43(5): M686-M691 .[CrossRef][Web of Science][Medline]
[Order article via Infotrieve]
- Yamazaki, K., Litwak, P., Tagusari, O., Mori, T., Kono, K., Kameneva, M., Watach, M., Gordon, L., Miyagishima, M., Tomioka, J., Umezu, M., Outa, E., Antaki, J.F., Kormas, R.L., Koyanagi, H. and Griffith, B.P. (1998). An Implantable Centrifugal Blood Pump with a Recirculating Purge System (Cool-Seal System) , Artif. Organs, 22(6): 466-474 .[CrossRef][Web of Science][Medline]
[Order article via Infotrieve]
- Gutensohn, K., Beythien, C., Bau, J., Fenner, T., Grewe, P., Koester, R., Padmanaban, K. and Kuehnl, P. (2000). In Vitro Analyses of Diamond-like Carbon Coated Stents: Reduction of Metal Ion Release, Platelet Activation, and Thrombogenicity , Thrombosis Research, 99: 577-585 .[CrossRef][Web of Science][Medline]
[Order article via Infotrieve]
- Jones, J.I., McColl, I.R., Grant, D.M. and Parker, T.L. (2000). Protein Adsorption and Platelet Attachment and Activation, on TiN,, TiC, and DLC Coatings on Titanium for Cardiovascular Applications , J. Biomed. Mater. Res. 413-421 .
- De Scheerder, I., Szilard, M., Yanming, H., Ping, X.B., Verbeken, E., Neerinck, D., Demeyere, E., Coppens, W. and Van de Werf, F. (2000). Evaluation of the Biocompatibility of Two New Diamond-like Stent Coatings (Dylyn) in a Corcine Coronary Stent-model , J. Invasive Cardiol., 12(8): 389-394 .[Web of Science][Medline]
[Order article via Infotrieve]
- Tran, H.S., Puc, M.M., Hewitt, C.W., Soll, D.B., Marra, S.W., Cilley, J.H. and Del Rossi, A.J. (1999). Diamond-like Carbon Coating and Plasma or Glow Discharge Treatment of Mechanical Heart Valves , J. Investigat. Surg., 12: 133-140 .[CrossRef]
- Montiés, J.R., Dion, I., Havlik, P., Rouais, F., Trinkl, J. and Baquey, C. (1997). Cora Rotary Pump for Implantable Left Ventricular Assist Device: Biomaterial Aspects , Artificial Organs, 21(7): 730-734 .[Web of Science][Medline]
[Order article via Infotrieve]
- Dion, I., Roques, X., Baquey, C.H., Baudet, E., Basse Cathalinat, B. and More, N. (1993). Hemocompatibility of Diamond-like Carbon Coating , Bio-Medical Materials and Engineering, 3: 51-55 .
- Dumkum, C., Grant, D.M. and McColl, I.R. (1997). A Multilayer Approach to High Adhesion Diamond-like Carbon Coatings on Titanium , Diamond and RelatedMaterials, 6: 802-806 .[CrossRef]
- Allen, M., Law, F. and Rushton, N. (1994). The Effects of Diamond Like Carbon Coatings on Macrophages, Fibroblasts and Osteoblast-like Cells In Vitro , Clin. Mater., 17: 1 .[CrossRef][Medline]
[Order article via Infotrieve]
- Allen, M., Myer, B. and Rushton, N. (2001). In Vitro and In Vivo Investigations into Biocompatibility of Diamond-like Carbon (DLC) Coatings for Orthopedic Applications , J. Biomed. Mater. Res., 58: 319 .[CrossRef][Web of Science][Medline]
[Order article via Infotrieve]
- Thomson, L.A., Law, F.C., Rushton, N. and Franks, J. (1991). Biocompatibility of Diamond-like Carbon Coating , Biomaterials, 12: 37 .[CrossRef][Web of Science][Medline]
[Order article via Infotrieve]
- Montezuma, S.R., Loewenstein, J., Scholz, C. and Rizzo, J.F. (2004). Biocompatibility of Subretinal Materials in Yucatan Pigs , Invest. Ophthalmol. Vis. Sci., 45(E-abstract): 4169 .
- Sushil Kumar, S., Dixit, P.N., Sarangi, D. and Bhattacharyya, R. (1999). Possible Solutions to the Problem of High Built-up Stresses. I: Diamond-like Carbon Films , J. Appl. Phys., 85(7): 3866-3876 .[CrossRef]
Journal of Bioactive and Compatible Polymers, Vol. 21, No. 1,
5-22 (2006)
DOI: 10.1177/0883911506060202

CiteULike Complore Connotea Del.icio.us Digg Reddit Technorati Twitter What's this?
This article has been cited by other articles:

|
 |

|
 |
 
C.-Y. Chen, Qi Long, X.-H. Li, and Jiao Xu
Microwave-assisted Preparation of Magnetic Albumin Microspheres
Journal of Bioactive and Compatible Polymers,
September 1, 2008;
23(5):
490 - 500.
[Abstract]
[PDF]
|
 |
|
|
|